BroadLink SP4M-US - Page 25

7.4. Set Up Cycled Timer
On Regular Timer setting page, tap “Cycle” on the top right to switch to Cycled Timer setting.
Set a start time and an end time (you can choose sunrise/sunset as start/end time). Then set the
duration time and action for operation 1 and operation 2. For “Repeat setting” please refer to 6.2. Set
Up Regular Timer.
Tap “Save” to save the timer. You can also tap “Common” on the top right to switch back to regular
timer setting.
7.5. Set Up Delay Timer
Tap “Delay” in device control page to add a delay timer.
You can pick up a preset delay time from the list or customize it as you want.