Broadview OfficeSuite - Installing Your Phone; Connecting to Network and Handset

1A: CONNECT YOUR PHONE TO THE LOCAL
AREA NETWORK
Connect one of the provided Ethernet cables into
your existing local area network (LAN) and into the
port on the power adapter. Next, connect another
Ethernet cable into the
port on your power
adapter and into the
port on the back of
your OceSuite® phone.
Installing Your Phone Without
Power Over Ethernet
1B: CONNECT YOUR PHONE TO THE LOCAL
AREA NETWORK
If your network is Power over Ethernet enabled, you
do not need the power adapter and should simply
connect an Ethernet cable into your existing local
area network and into the
port on the back
of your OceSuite® phone.
2: CONNECT YOUR PHONE HANDSET
Connect your phone handset into the port next to
on the back of your OceSuite® phone. You may also
connect a headset into the port next to
on the
back of your OceSuite® phone.
3: CONNECT YOUR PC TO YOUR PHONE
OPTIONAL
OceSuite® can utilize an integrated Ethernet switch
that allows you to connect to your computer without
requiring an Ethernet Port.
To do this, connect one of the provided Ethernet
cables to your computer and into the PC port
on the back of your OceSuite® phone.
Installing Your Phone With Power
Over Ethernet
For helpful videos, guides and other tools, visit:
http://www.broadviewnet.com/getting-started
For a list of recommended headsets, go to www.broadviewnet.com/ready
{OR}
Proceed to STEP 2
9
(optional)