WIRING
BLACK
TO
BLACK
TOP / BACK
OF HOUSING
GROUND TO
WIRING PLATE
WHITE
TO
WHITE
WIRING
PLATE
120 VAC
"_ LINE IN
(from
range
hood)
Ventilator can be wired jmm outside qj housing.
Use UL approved connectors to wire per local codes.
Page 3
WIRING OPTIONS
WiRiNG PLATE POSiTiON
HORIZONTALPOWER
CABLE CONNECTION
VERTICAL
POWER
CABLE
I I CONNECTION
Wiring plate mounts to side or top c_/ housing.
MOUNTING OPTIONS
¼-20 hex nuts secure mounting brackets to housing. Loosen and
re-tighten or remove and replace nuts as necessary for desired
mounting bracket position.
1½"
11j_,, _ t_,,MAX.
Mounting brackets in Mounting brackets .flipped
Jbctory-shipped position, over and mounted to
(Outlet parallel to joists.) outlet sides of housing.
(New construction) (Outlet parallel to joists.)
(_ construction)
0 0
I_=== 12¼" ===._
Mounting brackets
mounted to outlet sides c_f
housing.
(Outlet perpendicular to joists.)
(New construction)
Mortaring brackets .flipped
over to give approx. 1"
more clearance.
(Outlet parallel to joists.)
(New construction)
" _V_ 113/4'I
0 0 . o o _-I
[ k.------12¼"---------,4 1 I.,,---12_"---,_ I
Mounting brackets Mounting brackets .flipped
mounted to top _f sides c_f over and mounted to top
housing, c_ sides c_ housing.
(Outlet parallel to joists.) (Outlet parallel to joists.)
(New or existing construction) (New or existing construction)
DUCTING OPTIONS
BLOWER DISCHARGE POSiTiONS
DUCT DUCT
CONNECTOR CONNECTOR
Blower and duct connec-
tor in straight through
discharge position.
(Factory shipped)
Blower and duct connec-
tor in right angle dis-
char eg.d_position.
DUCTING (Right angle blower discharge)
ROOF CAP
ROUND
DUCT
!
I
1 I
Typical ductwork connection to a ventilato," converted
to right angle discharge.
To Next Page
Loading...
