Need help?Do you have a question about the Brocade Communications Systems ICX 6610 series and is the answer not in the manual?
Details considerations for upgrading to or downgrading from FastIron 08.0.30.
Discusses configuration changes and potential issues with Link Aggregation Groups (LAGs).
Covers upgrade considerations for devices in stack configurations, including hitless stacking.
Outlines the general steps required to upgrade software on the device.
Details the preparatory steps before performing a software upgrade or downgrade.
Describes the procedure for upgrading the software on various FastIron products.
Explains the steps and considerations for downgrading software on different devices.
Provides procedures for recovering devices from image installation failures or corrupted flash.
Compares show command output differences between FastIron 07.4.00 and 08.0.xx releases.
General| Model | ICX 6610 series |
|---|---|
| AC Input Voltage | 100-240 VAC |
| AC Input Frequency | 50/60 Hz |
| Maximum VLANs | 4094 |
| DRAM | 4 GB |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Humidity | 5% to 95% (non-condensing) |
| CPU | Dual-core |
| Power Supply | hot-swappable |
| Fans | hot-swappable |
To Next Page
