!
WARNING: Cancer
and Reproductive Harm
www.P65Warnings.ca.gov
36
BROCE FMJ470
Dierential
The axle bearings do not receive lubrication from the gear oil. Periodically remove
the axle shafts and repack the bearings.
Check the level every 210 hours of
operation. Change oil every 1000
hours of operation.
Core/Brush Bearing
This is a sealed bearing and may
require no lubrication throughout its
service life. If lubrication is deemed
necessary however, no more than
“one-shot” of grease at 250 hour
intervals is recommended. Seals
are often destroyed by over-greas-
ing sealed bearings.
Engine Lubrication
Refer to the Engine Manufacturer’s manual (included) for recommendation and pro-
cedures for servicing the engine.
MAINTENANCE
LUBRICATION
To Next Page
Loading...