Page 20/26IOM Single Case BiRotor Plus R06
Parts List
This section contains the necessary parts required to make
up any standard unit that is covered in this bulletin. Each
parts list also contains the recommended spare and
replacement parts denoted by an asterisk. For items that
are not listed or additional information, consult factory.
Whenordering, the following information must be
furnished.
1. Part number and description.
2. Model number of fl ow meter.
3. Serial number of fl ow meter.
4. Quantity required.
When ordering items of a material or special construction
not indicated in the Parts List, furnish the following
information so that the part number of the item can be
determined.
1. Item number and description.
2. Specifi c material of item.
3. Model number of fl ow meter.
4. Serial number of fl ow meter.
5. Quantity required.
To Next Page
Loading...
