Bromic Heating Tungsten 2000w

Questions and Answers

A
andrewdennisAug 11, 2025
Why is my Bromic Heating Tungsten 2000w Electric Heater not producing enough heat?
- J
  Janet LewisAug 11, 2025
  If your Bromic Heating Electric Heater isn't producing enough heat, it might be due to a couple of reasons. First, the heater could be too small for the area you're trying to heat; in that case, consider adding more heaters. Second, the heater might be mounted too high or too far away. Try lowering the mounting height or reducing the distance to the area you want to heat.
K
Kelli MasonAug 18, 2025
Why is my Bromic Heating Tungsten 2000w producing too much heat?
- R
  Robert HopkinsAug 18, 2025
  If your Bromic Heating Electric Heater is generating too much heat, it could be because the heater is too large for the space. Replacing it with a smaller heater might solve the issue. Alternatively, the heater might be mounted too low or too close to the area you're trying to heat. Try increasing the mounting height or distance.
C
Christopher StevensAug 26, 2025
What to do if the element does not energize on my Bromic Heating Electric Heater?
- T
  Tonya CaseyAug 27, 2025
  If the element in your Bromic Heating Electric Heater isn't energizing, there are a couple of things to check. First, it could be a defective element, which would require replacement. Second, there might be an improper connection. Ensure the heater is properly connected to the power outlet.
J
James GillespieSep 3, 2025
How to fix a hot spot in the tube of my Bromic Heating Electric Heater?
- F
  Frank WilliamsonSep 3, 2025
  If you notice a hot spot in the tube of your Bromic Heating Electric Heater, a couple of things could be the cause. It might be that the heater isn't level, so try adjusting it to a level mount. Also, check for any grease or moisture on the tube; if present, clean the tube. If the problem continues after cleaning, consider replacing the tube.