ELEMENT INSTALLATION CONTINUED...
5. Close element lock bracket & fasten with self
tapping screw. Repeat for other end of heater.
6. Assemble end caps at both ends of the heater with
2 self tapping screws. For 4000W & 6000W models
ensure that the middle tab of the end caps are
slotted behind the element support bracket.
7. Assemble front cover onto the heater. Hook front
cover to one side of the heater and push other
side down. Fasten into position with 3 self tapping
screws.
2000W & 3000W Models 4000W & 6000W Models
To Next Page
Loading...