7 TROUBLESHOOTING (cont.)
CONDITION POSSIBLE CAUSE POSSIBLE SOLUTION
Poor performance,
or not purifying at
optimum capacity.
Filter is due for replacement. Replace with new lter set.
Blockage at Air Inlet or Air Outlet. Contact the Brondell Service Center.
Plastic wrap on lters not removed. Remove the plastic wrap and put
lters back in.
Clearance around appliance not
adequate for air ventilation.
Ensure that there is clearance of
20” on each side and 4” in the back
of the appliance.
Missing lters or lters were
inserted in the wrong order.
Ensure all 3 lters are placed in the
correct order (see Page 3 of this
manual).
Exceeded expected room coverage
area.
Suggested room coverage area is
approximately 260-300 square feet.
14
To Next Page
Loading...
