BRONKHORST
®
page 10 9.17.022
IN-FLOW , IN-PRESS
To comply with the IP65 ingress protection standard, the p.c. board is housed in a
sealed casted metal housing. For electrical connections the instrument has a 8DIN
male connector for analog/RS232 operation and for digital operation various
connectors on top. These instruments are suited for light industrial (outdoor) use to
IP65.
LIQUI-FLOW
®
Two different digital-liquid flow meters can be distinguished:
-FLOW model
The -FLOW model for up to 2 g/h, basically a straight capillary tube with a sensor.
For electrical connection the instrument is equipped with a male 9-pin sub D-
connector. The instrument is suited for dry (indoor) applications like laboratories.
CTA based LIQUI-FLOW
The CTA based LIQUI-FLOW
model for flow rates up to approximately 1000 g/h.
For electrical connection the instrument is equipped with a male 9-pin sub D-
connector. The instrument is suited for dry (indoor) applications like laboratories.
To comply with the IP65 ingress protection standard, the p.c. board is housed in a
sealed casted metal housing. For electrical connections the instrument has a 8DIN
male connector for analog/RS232 operation and for digital operation various
connectors on top. These instruments are suited for light industrial (outdoor) use to
IP65.
To Next Page
Loading...