BRONKHORST
®
9.17.022 page 11
1.1.5 Valves
Laboratory style
For gases:
The solenoids of these valves have an IP50 ingress protection class.
This means that the valves are suited for dry (indoor) use.
For liquids:
The solenoids of these valves have an IP50 ingress protection class.
This means that the valves are suited for dry (indoor) use.
This valve is equipped with a purge connector.
Industrial style
For gases:
The solenoids of these valves have an IP65 ingress protection class. This means
that they are suited for light industrial (outdoor) use.
For liquids:
The solenoids of these valves have an IP65 ingress protection class. This means
that they are suited for light industrial (outdoor) use.
This valve is equipped with a purge connector.
To Next Page
Loading...