Brook WINGMAN CONVERTER - Connecting to the Device

Connecting to the Device
step. 7
Connect Wingman SD to Saturn / Dreamcast / PC via port.
Permanently light of the Console Green LED of Wingman SD
indicates that the connection to the console is successful.
Conn nect tthe Xbox 360 / Xbox One / P53 / P54 / Switch wired
controller or game pad to Wingman 5D through the USB port. Some
devices with high power consumption, such as the Switch Pro
controller, require an external USB power source for normal use.
Simoly e connect L thes wireless X360 wireless receiver to the Wingman
SD through the USB port.
Ising Xbox One wireless controller / Xbox One Elite Serie ontroller:
Connect the Xbox One wireless controller (Bluetooth model) or the
Xbox One Elite Series 2 to the Wingman 5D and the controller will be
ready for use. When connecting, hold the Brook Key on the Wingman
SD for 1 second to enter wireless pairing mode. Then press the Pair
button on the wireless
controller to begin pairing.
Fast blinking of Device Red
LED of Wingman 5D indicates
that pairing is in progress,
After com pietii the connection сонати to the instructions of the
Wired Connection, remove the USB cable, and then wake up the P53
/ Р54 / Switch Pro wireless controller.
step. 3
Check whether the Device Red LED of the Wingman 5D is
permanently on. This indicates that the connection is completed.