Brookfield HBDV-II+Pro User Manual

Brookeld Engineering Labs., Inc. Page 1 Manual No. M/03-165-D0410
SPECIALISTS IN THE
MEASUREMENT AND
CONTROL OF VISCOSITY
TEL 508-946-6200
FAX 508-946-6262
or 800-628-8139 (USA e xcluding MA)
I
NTERNET
http://www.brookeldengineering.com
BROOKFIELD ENGINEERING LABORATORIES, INC.
11 Commerce Boulevard, Middleboro, M A 02346 USA
with oces in :
Boston • Chicago • London • Stuttgart • Guangzhou
BROOKFIELD DV-II+Pro
Viscometer
Operating Instructions
Manual No. M/03-165 D0410

Brookfield HBDV-II+Pro Specifications

General

Model	HBDV-II+Pro
Manufacturer	Brookfield
Category	Measuring Instruments
Type	Digital Viscometer
Accuracy	±1.0% of range
Repeatability	±0.2%
Viscosity Display	cP or mPa·s
Display	LCD
Temperature Measurement	Optional
Data Output	RS-232
Interface	RS-232
Power Supply	100-240 VAC, 50/60 Hz
Temperature Range	Depends on accessory

Summary

I. INTRODUCTION

1.4 Installation

Guidelines for setting up the Model S Laboratory Stand and viscometer.

1.5 Safety Symbols and Precautions

Explains safety symbols and general operating precautions.

1.6 Key Functions

Describes the function of each key on the DV-II+Pro control panel.

II. GETTING STARTED

II.1 Autozero

Explains the autozero procedure required before taking readings.

II.2 Spindle Selection

Describes how to identify and select the correct spindle for measurements.

II.3 Speed Selection, Setting, Running

Covers selecting, setting, and running the viscometer at different speeds.

II.10 Making Viscosity Measurements

Provides a general procedure for performing viscosity measurements.

III. OPTIONS

III.2 Setup

III.3 Time Modes

III.3.5 Download a Program

IV. DVLOADER SOFTWARE

IV.3 Creating a B.E.V.I.S. Program

IV.4 Downloading a B.E.V.I.S. Program

V. AUTOMATED DATA GATHERING & ANALYSIS

V.1 WINGATHER32

V.2 RHEOCALC32

Appendix A - Cone/Plate Viscometer Set-Up

A.3 SETTING THE GAP

A.4 VERIFYING CALIBRATION

Appendix E - Calibration Procedures

Interpretation of Calibration Test Results:

Appendix K - Fault Diagnosis and Troubleshooting

Fault Diagnosis and Troubleshooting