Brookfield CAP 2000+H User Manual

Brookeld Engineering Labs., Inc. Page 1 Manual No. M02-313E1209
SPECIALISTS IN THE
MEASUREMENT AND
CONTROL OF VISCOSITY
T
EL
508-946-6200
F
AX
508-946-6262
or 800-628-8139 (USA e xcluding MA)
I NTERNET http://www .brookeldengineering.com
BROOKFIELD ENGINEERING LABORATORIES, INC.
11 Commerce Boulevard, Middleboro, MA 02346 USA
with oces in:
Boston • Chicago • London • Stuttgart • Guangzhou
BROOKFIELD CAP 2000+
Viscometer
Operating Instructions
Manual No. M02-313E1209

Brookfield CAP 2000+H Specifications

General

Model	CAP 2000+H
Spindle Speed	5 to 1000 RPM
Temperature Control	Peltier
Repeatability	±0.2%
Viscosity Display	Digital
Accuracy	±1%
Interface	RS-232
Power Supply	100-240V, 50/60Hz

Summary

Introduction to the CAP 2000+ Viscometer

Specifications of the CAP 2000+ Viscometer

Installation Instructions for the CAP 2000+ Viscometer

Step-by-step instructions for correctly installing the viscometer.

Safety Symbols and Precautions

Explains safety symbols and provides an overview of safe operating practices.

Getting Started with the CAP 2000+ Viscometer

Powering On the CAP 2000+ Viscometer

Cone Spindle Selection and Setting

Guides the user on how to select, attach, and set the cone spindle.

Speed Setting for Measurements

Temperature Control and Time Settings

Operation of the CAP 2000+ Viscometer

Full Scale Range and Accuracy of Measurement

Accuracy of Viscosity and Temperature

Calibration Verification Procedure

Explains how to verify the calibration of the viscometer and its components.

Cone Calibration Process

Details the process for performing a cone calibration using standard fluids.

Making Viscosity Measurements

Provides a recommended procedure for performing viscosity measurements.