Site Manual
Alarm 2000 Iss 5
55
11 GUARANTEE
If the product has any defect due to faulty workmanship or material it is to be returned to
one of the Brooks offices shown in this manual. Brooks will, at its sole discretion, repair or
replaced the item free of charge.
On returning a component or complete product, proof or purchase will be required. If
returning the complete product all accessories and documentation MUST be returned.
This guarantee does not cover damage caused to the product or its components as a
result of incorrect installation, accident, neglect, misuse, unauthorised dismantling or
contamination howsoever caused, careless handling or where repairs have been made or
attempted by others. On site warranty repairs will be carried out at the discretion of the
manufacturer.
No other guarantees written or verbal are authorised to be made on behalf of Brooks. All
other conditions and warranties whether expressed or implied are, to the extent permitted
by law, hereby excluded.
As Brooks Australia has no control over the system's design, installation to the relevant
Australian Standard or maintenance, the Company and its agents take no responsibility
for any damage, consequential loss or injury caused to any equipment, property or persons
resulting from the use of the Residential Fire Panels.
Brooks guarantees system components, other than smoke/heat alarms for a period of
either three years from the date of purchase. Smoke / Heat Alarms are guaranteed to the
original purchaser for a five year period after the original date of purchase.
Remember the EIB161e and EIB141RC contain a small quantity of radioactive material.
You must return unwanted Smoke Alarms to your supplier or your local Department of
Health. Transportation of the Smoke Alarm must be by hand, courier or similar means.
Disposal via the post is not permitted.
To Next Page
Loading...
