Brookstone Renew - Setting Up and Adjusting the Chair

Setting up the Brookstone Renew
TM
Massage Chair
Backrest cushion layer
Preparation before use
Removable Backrest cushion layer is
provided to help you achieve the
massage intensity you want.
• If you feel the massage is too light,
remove the Backrest cushion layer.
• If you feel the massage is too strong,
insert the Backrest cushion layer.
• Brookstone Renew
TM
Massage
Chair is shipped with the backrest
reclined.
• Before use, ensure that the backrest
is raised fully to it’s upright position
• Pull up the zipper to connect
backrest and cushion.
• Find Backrest cushion layer on
inside of backrest cushion.
Adjusting Shoulder Height
Shoulder position is adjustable
according to your height.
Adjust the position, up or down, in
small increments. NOTE: Be careful
not to exert too much pressure or it
could damage the chair.
Adjusting the Head Pillow
To increase intensity, the headrest can
be removed, as shown. NOTE:
Pillow is attached using Velcro and
can be easily removed.
To access Backrest Cushion Layer
Removable Seat Cushion Layer is
available to help you to get the
massage intensity you want.
• If you feel the massage is too light,
remove the Seat Cushion Layer
• If you feel the massage is too strong,
reattach the Seat Cushion Layer
Seat Cushion Layer
Cushion pad
Velcro
Backrest
Backrest pad
12