What to do if Brookstone Massager remote powers on but nothing happens?
If the remote powers on but nothing happens, the remote may need to be rebooted. Turn off the chair. Unplug the remote for 2 minutes and plug it back in. Turn the chair on and press the power button again.
Why does the screen go dark on my Brookstone Renew?
The display screen goes to “Sleep” after 3 minutes to prevent screen burnout. Press any button and the screen will awaken.
Why does the button on my Brookstone Massager require two presses to activate?
If a button requires two presses to activate, the remote is likely in idle mode. The first press awakens the remote, and the second press activates the command. This is normal behavior when the remote is idle.
Why is my Brookstone Massager making noise?
These sounds are the result of mechanical structure and not a malfunction. This may occur during normal usage.
Essential safety rules for safe operation of the massage chair.
Advisories for individuals with specific health conditions before use.
Situations and conditions when the chair must not be used.
Precautions for safe use of the power plug, cord, and general electrical safety.
Overview and descriptions of the 8 pre-set massage programs for user selection.
Essential safety rules for safe operation of the massage chair.
Advisories for individuals with specific health conditions before use.
Situations and conditions when the chair must not be used.
Precautions for safe use of the power plug, cord, and general electrical safety.
Overview and descriptions of the 8 pre-set massage programs for user selection.
General| Massage Techniques | Kneading, Shiatsu |
|---|---|
| Massage Nodes | 4 |
| Heat Function | Yes |
| Power Source | AC Adapter |
| Type | Neck and Shoulder Massager |
| Massage Modes | 2 (Auto-Reversing) |
To Next Page