Brookstone Renew - Product Care and Storage

Storing the Brookstone Renew
TM
Massage Chair
Product care and storage
• Wipe off dust and dirt from the
Brookstone Renew
TM
Massage Chair
with a soft, dry cloth after use.
• Keep the Brookstone Renew
TM
Massage Chair clean and away
from places of high humidity.
• If the Brookstone Renew
TM
Massage
Chair is not going to be used for a
long time, cover it with a dust cover
and disconnect its power plug from
the electrical outlet.
Cleaning the Brookstone Renew
TM
Massage Chair
• Before cleaning, ensure that the
main power switch is turned off and
the AC plug is disconnected from
the electrical outlet.
• Wipe off dust and dirt from the
Brookstone Renew
TM
Massage Chair
after use.
• The Brookstone Renew
TM
Massage
Chair can be cleaned thoroughly
with a piece of slightly damp cloth.
Do not pour any liquids directly on
to the chair.
• Do not iron the upholstery.
Caring for Zip Out Foot Liners
• Before removing liners, ensure that
the main power switch is turned off
and the AC plug is disconnected from
the electrical outlet.
• Check the foot liners prior to every
use.
• To clean the liners, unzip from the
footrest and remove.
• Hand wash or wash in Gentle Cycle
• To prevent injury, do not continue to
use Brookstone Renew
TM
Massage
Chair / footrest until foot liners have
been placed back in the footrest.
• Return the liners to the footrest and
zip them in.
Caution against discoloration
• Do not store the massage
chair under direct sunlight or in
places of high temperature. This
may cause the color of the
upholstery to fade.
• Do not allow the massage
chair to remain in contact with vinyl
or wallpaper for extended periods
of time as this could lead to
discoloration.
• Do not use abrasive cleaning agents
like benzene or thinner to clean the
Brookstone Renew
TM
Massage Chair.
This may cause the upholstery to
fade.
• Do not iron the fabric of the massage
chair.
• Do not use a wet cloth to clean the
controller. This may result in
malfunction.
Caution
Caution
20