Brother 888-E40 - Spool Pin

11
1
——
———————————————————————————————————————————
—
——————————————————————————————————————————————————————————————————————————
Spool pin
As shown, press down on the spool pin lever with
your finger to raise the spool pin.
■ Storing the spool cap
The enclosed spool cap (large, medium, small)
can be stored by attaching it to the spool pin as
shown in the illustration. When attaching the
spool cap, position it with the rounded side
toward the spool pin.
■ Storing the spool pin
When placing the cover on the sewing machine
before storing or if the spool pin will not be used,
return the spool pin to its storage position.
Remove the spool from the spool pin, and then
fold up the spool pin, as shown in the illustration,
until it snaps into place to secure it.
● Do not grab the bar to raise the spool pin,
otherwise, the spool pin may bend or break.
CAUTION