Brother ADS-1300 - 4 Connect your machine and install software

2
Using your scanner with your computer or mobile device
A
Visit setup.brother.com to download and
install the required Brother software.
Follow the on-screen
instructions to continue
installation.
For Mobile Devices
(ADS-1350W/
ADS-1800W only):
Set up the connection
manually.
Setup Finished
setup.brother.com
When nished, restart your computer.
If not successful, set up the connection
manually.
For detailed scanning instructions, see
the Online User’s Guide at
support.brother.com/manuals.
For Mac: Visit support.brother.com/mac to
download the required Brother software.
If setup is still not successful, visit support.brother.com for FAQs, Troubleshooting, and manuals. For product
specications, see the Online User’s Guide.
NOTE
Using your scanner as a standalone device (ADS-1350W/ADS-1800W only)
B
Connect your machine to your network via Wi-Fi
®
.
You can set up your Wi-Fi connection using either the machine’s control panel or your computer.
This machine supports only 2.4 GHz.
Connect your machine and install software
Select your preferred scanning method and choose your connection method.
4
Power Shortage Error
LED Status
(ADS-1300/ADS-1350W)
LCD Status
(ADS-1800W)
Scan
Operation
Description
Off Off Lit
The Home Screen appears.

The machine works correctly,
running on over 15 W power.
Flashing Flashing Off
The error message
“Power Shortage (Code: 01)”
appears.
✕
The machine does not work due to
a power shortage (less than 15 W).
Visit support.brother.com for
FAQs & Troubleshooting or see
your model
’ s Online User ’ s Guide
at support.brother.com/manuals.
Off Off Off
The machine is not turned on
and nothing appears.
✕
DON’T FORGET TO REGISTER!
Registering your product will provide purchase conrmation, proof of ownership and, if you choose, allow us to
notify you of product enhancements and special offers!
You can register online at: www.registermybrother.com (USA)
Manual Wireless Setup (ADS-1350W/ADS-1800W only)
If you do not have a computer connected to the network or if you cannot connect your machine using your computer, try to set up the
connection manually.
ADS-1350W
Press and hold
for
two seconds.
When the Wi-Fi Indicator starts
blinking, press the WPS button on your
wireless access point/router.
When the wireless setup is successful, the Wi-Fi
Indicator stops blinking and remains lit.
ADS-1800W
Press
> [Find
Wi-Fi Network] >
[Yes].
Select the SSID (Network Name).
Enter the Network Key (Password).
When the wireless setup is successful, the LCD
displays [Connected].
NOTE
• If setup is not successful, restart your machine and the wireless access point/router, and then repeat these steps.
• If using a computer, go back to
A
to install software.
If you cannot nd your SSID or
Network Key, ask your network
administrator or wireless access
point/router manufacturer.