Brother ADS-3000N User Manual

5-3
Confidential
1.3 Details of Maintenance Mode Functions
1.3.1 Change USB No. return value (End-user accessible maintenance mode only)
<Function>
When the operating system (OS) installed on the computer is Windows Vista
®
, and the
machine is connected to this computer using USB2.0FULL, the OS may not be able to obtain
the USB device serial number depending on the computer and the USB device. If the serial
number cannot be obtained, the number of devices increases each time the device is
connected to the computer. To avoid this problem, set this function to "USBNo.=ON" and fix
the USB No. return value to "0".
<Operation Procedure>
(1) In function number selection mode of end-user accessible maintenance mode, press the
[to USB] key once. The to USB LED lights.
(2) Press the [X] key.
When the Power LED lights for one second, it means that "return serial number of
machine" is set.
When the Error LED lights for one second, it means that "return 0" is set.
(3) When setting is completed, the machine returns to the ready state.
1.3.2 Initialize user setting
<Function>
This function is used to initialize the setting values for operation parameters, user switches,
and others registered in the EEPROM.
<Operation Procedure>
(1) In function number selection mode of maintenance mode, press the [to USB] key three
times. The to PC LED and the to USB LED light.
(2) Press the [X] key. The EEPROM is initialized, and the machine returns to the ready
state.
1.3.3 Check ADF
<Function>
This function is used to check whether the document set in the ADF is fed correctly while
counting the number of documents.
<Operation Procedure>
(1) In function number selection mode of maintenance mode, set the document in the ADF.
(2) Press the [to USB] key four times. The Power LED lights.
(3) Press the [X] key. The document is picked up and fed one sheet at a time, and the to
USB LED lights each time.
Check that the number of times the LED lights matches the number of documents set.
(4) Press the [X] key. The machine returns to function number selection mode.

Brother ADS-3000N Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	30 bit
Maximum scan size	215.9 x 355 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	50 ppm
Enhanced scan resolution	1200 x 1200 DPI
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	100 ipm
Scanner type	ADF scanner
Product color	Black
Scan to	FTP, File, HTTP, Image, OCR, USB
Sensor type	Dual CIS
Scan drivers	ICA, ISIS, TWAIN, WIA
Internal memory	256 MB
Built-in processor	Cortex-A9
Processor frequency	800 MHz
Scanning noise level	63.9 dB
Daily duty cycle (max)	5000 pages
Supported network protocols	ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder, Custom Raw Port/Port9100, SMTP Client, FTP Client and Server, LDAP Client, CIFS Client, SNMPv1/v2c/v3, HTTP/HTTPS server, TFTP client and server, ICMP, Web Services (Scan), SNTP Client
Auto document feeder (ADF) input capacity	50 sheets
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
ISO B-series sizes (B0...B9)	B5, B6, B7, B8
Scanning media types supported	Business Card, Envelopes, Plastic Card
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	27 - 413 g/m²
USB version	3.2 Gen 1 (3.1 Gen 1)
Standard interfaces	Ethernet, USB 3.2 Gen 1 (3.1 Gen 1)
Power supply type	AC
Power consumption (off)	0.12 W
Power consumption (standby)	4.1 W
Power consumption (typical)	30 W
Power consumption (PowerSave)	2.9 W
PC connection	RJ-45
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Package depth	254 mm
Package width	382 mm
Package height	330 mm
Package weight	6200 g
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	258 mm
Width	306 mm
Height	250 mm
Weight	4450 g