Need help?Do you have a question about the Brother ADS-2100 and is the answer not in the manual?
General| Film scanning | No |
|---|---|
| Color scanning | Yes |
| Grayscale levels | 256 |
| Input color depth | 30 bit |
| Maximum scan size | 215.9 x 863 mm |
| Output color depth | 24 bit |
| ADF scan speed (b/w, A4) | 24 ppm |
| Enhanced scan resolution | 1200 x 1200 DPI |
| Optical scanning resolution | 600 x 600 DPI |
| Duplex ADF scan speed (b/w, A4) | 48 ipm |
| Scanner type | Sheet-fed scanner |
| Product color | Black |
| Scan to | E-mail, File, Image, OCR, USB |
| Sensor type | CMOS dual CIS |
| Scan drivers | ISIS, TWAIN, WIA |
| Internal memory | 256 MB |
| Scan file formats | JPG, PDF, TIFF |
| Processor frequency | 400 MHz |
| Scanning noise level | 62.5 dB |
| Daily duty cycle (max) | 500 pages |
| Auto document feeder (ADF) input capacity | 50 sheets |
| Minimum scan area (ADF) | 51 x 70 mm |
| ISO A-series sizes (A0...A9) | A4, A5, A6, A7, A8 |
| Scanning media types supported | Business Card, Plain paper, Plastic Card, Recycled paper, Thick paper, Thin paper, Business card, Plastic card |
| Maximum ISO A-series paper size | A4 |
| Auto Document Feeder (ADF) media weight | 52 - 200 g/m² |
| USB version | 2.0 |
| Standard interfaces | USB 2.0 |
| Input voltage | 220-240 V |
| Power supply type | AC |
| AC input frequency | 50 Hz |
| Power consumption (off) | 0.3 W |
| Power consumption (standby) | 7 W |
| Power consumption (typical) | 18 W |
| Power consumption (PowerSave) | 1.5 W |
| Package weight | 5400 g |
| Image formats supported | JPG, TIF |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth | 179 mm |
|---|---|
| Width | 220 mm |
| Height | 299 mm |
| Weight | 3300 g |
Lists general, network, service, paper, and scanner specifications for ADS-2000/2100 models.
Details core scanner specs: method, resolution, speed, power consumption, and environment.
Details scanner capabilities, compliance, color depth, resolution, and scanning width.
Explains the purpose of the troubleshooting chapter and its content.
Lists critical safety and handling precautions for troubleshooting procedures.
Outlines essential checks for environment, power, and documents before repairs.
Details how error conditions are displayed and what they mean.
Maps LED status patterns to specific error types and solutions.
Lists error messages, their descriptions, error codes, and corresponding reference pages.
Provides step-by-step solutions for various error displays and problems.
Addresses specific error codes and symptoms related to document detection and system errors.
Solves issues related to the double feeding sensor detecting multiple documents.
Provides solutions for document jams caused by long or improperly fed documents.
Troubleshoots errors from incompatible USB devices or exceeding memory capacity.
Guides on resolving errors from incorrect CIS cable connections, DRAM access, or country code issues.
Helps diagnose and fix common issues affecting scanned image quality.
Illustrates common image defects like light, streaks, or faulty registration.
Offers solutions for issues related to how documents are fed into the scanner.
Resolves problems where multiple sheets are fed simultaneously.
Provides steps to fix documents that wrinkle during feeding.
Guides on clearing and preventing document jams.
Troubleshoots issues where documents fail to feed into the scanner.
Lists essential safety guidelines for performing disassembly and reassembly procedures.
Outlines the step-by-step process for disassembling the scanner.
Step-by-step instructions for removing the main printed circuit board assembly.
Guides on adjustments required after replacing the main PCB assembly.
Details the procedure for updating or writing firmware to the main PCB.
Explains how to verify the current firmware version installed on the unit.
Provides step-by-step instructions for writing new firmware to the main PCB.
Describes how to access and use the scanner's maintenance mode.
Details the procedures for entering maintenance mode for users and service personnel.
Explains how end-users can access limited maintenance functions.
Details the procedure for service personnel to enter full maintenance mode.
To Next Page
