Brother AX-10 - Tabulation Functions

4in
TAB SET
Use the space bar and the backspace key as required to bring
the carrier to the position at which you desire to set a tab.
Then press the TAB + key to set the tab. A maximum of
12 tabs can be set any time.
Note: If you change the pitch from Pica to Elite (or Elite to Pica)
while you are typing, the tab positions may be slightly altered.
TAB CLEAR
Use the space bar and backspace key, or the TAB key as
required to bring the carrier to the position at which you
desire to clear a tab. Then press the TAB — key to clear the
tab.
ALL TAB CLEAR
TAB- REPEAT
To clear all the tabs that have been set, simply move to any tab stop, and press the TAB — key followed by
the repeat key.