Brother AX-10 - Correction Functions; Memory Correction; Manual Correction

CORRECTION FUNCTIONS
The 40-character correction memory of the AX-10 makes it possible to delete or correct
text with the touch of a single key. Manual corrections outside of the memory range are
also clean and quick. A handy half backspace function provides added versatility for
easy insertion or deletion of extra letters.
MEMORY CORRECTION
Let’s say you mistyped the word “Brother”.
Use the BACKSPACE key to move the carrier back
spaces to the position of the “a”.
<3
IHI
Now all you do is press the correction key and the “a” is
erased from the page. If you hold the correction key down,
the Y’, “B” and all text to the left will continue to be
erased until you release the key or you reach the end of
the correction memory range.
o
Type in the correct letter; in this case the letter “o”.
RELOC
Finaiiy, pressing the reiocate key brings the carrier back to
the position you were at before you began your correction.
MANUAL CORRECTION
Let’s say you mistyped “Brother” again, but, this time, the mistake is on a different line
or in another position outside of the correction memory range.
in this case, you shouid first press the return key to ciear the
contents of the correction memory. Now use the piaten knobs,
space bar and backspace key as required to bring the carrier to
the position of the error (in this case the “a” of “Brather”).
2
Next, hold down the code key and press the correction key. Now,
press the “a” key, and the ietter “a” wiii be erased from the page.
3
Brother
AA
o
Rnaliy, press “o” to complete the correction.