Why Brother BAS-300G Sewing Machine lower thread winding amount is incorrect?
If the lower thread winding amount is incorrect, it is likely due to an incorrect bobbin presser position. Adjust the position of the bobbin presser to resolve this.
Why Brother Sewing Machine upper thread is not trimmed?
If the upper thread is not being trimmed, it could be due to a movable knife that is not cutting cleanly, a fixed knife that is not cutting cleanly, or an incorrectly positioned movable knife. Also, the sub-tension might be too weak. To fix this, replace the movable knife with a new one, sharpen the fixed knife or replace it with a new one, adjust the position of the movable knife, or turn the sub-tension nut to adjust the tension.
What to do if Brother Sewing Machine work clamp does not lift or drop?
If the work clamp isn't lifting or dropping, it could be due to the work clamp moving stiffly or, if you have pneumatic work clamp specifications, a bent or damaged air tube of the presser lifter cylinder. Try applying a suitable amount of grease to the sliding parts of the work clamp. If you have the pneumatic version, straighten the bend in the tube or replace the tube.
Why Brother BAS-300G work clamp does not lift to the maximum height?
If the work clamp isn't lifting to the maximum height, it could be due to an incorrect work clamp arm stopper position (for motor-driven models) or an incorrect cylinder joint position (for pneumatic models). To resolve this, adjust the position of the stopper or adjust the position of the cylinder joint.
General| Brand | Brother |
|---|---|
| Model | BAS-300G |
| Category | Sewing Machine |
| Language | English |
Explains DANGER, WARNING, CAUTION levels and symbolic meanings.
Provides notes on environmental requirements and installation safety.
Covers safety during sewing, cleaning, and maintenance procedures.
Details the warning labels found on the machine and their meanings.
Connecting ground wires, power cords, and pneumatic lines.
Step-by-step guide to starting and performing sewing operations.
Setting needle bar height, lift, clearance, and knife positions.
Resolving problems with work clamp operation and thread wiper.
Addressing thread breaks, skipped stitches, and needle-related problems.
To Next Page
