BAS-311F-0 1/22
2002.1
BAS-311F-0
Programmable Electronic Pattern Sewer
With Cylinder Bed
Model
BAS-311F-0
□□
□□□□
□□
1 For heavy-weight materials S Work clamp lifter (Solenoid type)
2 For medium-weight materials A Work clamp lifter (Pneumatic type)
3 For extra heavy-weight materials
4 For special use
Specifications
Stitch formation Single needle lock stitch
Sewing machine Lock stitch, pattern tacking sewing machine (with large shuttle hook)
Maximum pattern size
130 × 60 mm
Maximum stitch number 20,000 (One pattern)
Stitch length 0.05 - 12.7 mm
Maximum sewing speed 2,500 rpm (When stitch length is 3 mm or less)
Feed mechanism Intermittent feed, pulse motor drive
Rotary hook Shuttle hook (Standard rotary hook is sold separately)
Needle
DP × 5, DP × 17, MR
Data storage method 3.5 floppy disk 2HD /1.44 MB, 2DD
Test function Operation test function provided for use with low speed drive
Safety devices
Automatic stop function for activation in the event of misoperation realized with intermediate stop function
and safety circuits
Work clamp height For solenoid – Max. 25 mm, for pneumatic – Max. 30 mm
2-step work clamp For solenoid – unit work clamp, for pneumatic – separate work clamp
Work clamp lift stroke 18 mm
Intermittent stroke 0 or 3 (Factory default) – 8 mm
Weights Machine head: 65 kg, Control box: 10-20 kg （Depending on destination）
Power supply Single-phase 110 V, 220 V, 230V, 240 V 3-phase 220 V, 380 V, 400 V, 600 VA
Motor Three-phase 400 W induction motor
Air pressure 0.5 MPa 1.8 l / min
Power table T-shaped for use sitting or standing
Machine dimensions
Sitting: 1,200 W × 590 D × 1,120 H mm
Standing: 1,350 H mm (Excluding spool stand)
To Next Page
Need help?
General
