Brother BAS-311F-0 User Manual (English)

Other manuals for Brother BAS-311F-0

Instruction Manual228 pages

Parts Book148 pages

Specifications And Parts List22 pages

Questions and Answers:

S
sarareillyAug 17, 2025
Why does the upper thread keep breaking on my Brother BAS-311F-0 Sewing Machine?
- J
  Jessica ArroyoAug 17, 2025
  The upper thread may break due to several reasons: * Incorrect upper thread tension: Adjust the upper thread tension. * Incorrect needle installation: Install the needle so that the groove is facing forward. * Incorrect thread for the needle: Use the correct thread for the needle. * Thread take-up spring issues: Adjust the tension and height of the thread take-up spring. * Damage or burring on parts: File smooth or replace the affected part. * Overheating: Use a thread cooling device. * Incorrect thread path: Pass the thread correctly along the thread path.
E
Eric Atkinson DDSAug 20, 2025
What to do if the lower thread breaks on my Brother Sewing Machine?
- L
  Laura DennisAug 20, 2025
  If the lower thread is breaking, check the following: * Lower thread tension: Adjust the lower thread tension. * Damage: File smooth or replace the affected part.
C
courtney30Aug 22, 2025
What to do if my Brother Sewing Machine does not operate when power is turned on?
- L
  longrobertAug 22, 2025
  If the machine doesn't operate when powered on: * Check if the cord is disconnected from the head position switch. * Adjust the position of the switching plate. * Replace the head position switch if it is broken.
S
smarquezAug 26, 2025
How to fix incorrect thread tightness on a Brother BAS-311F-0?
- W
  William MayAug 26, 2025
  To correct thread tightness issues on your Brother Sewing Machine, consider the following: * Adjust the upper thread tension. * Adjust the lower thread tension. * Adjust the tension and height of the thread take-up spring.
D
diane17Aug 28, 2025
Why does the thread slip out of the needle on my Brother BAS-311F-0 Sewing Machine?
- R
  Rhonda FoleyAug 28, 2025
  The thread may slip out of the needle because: * The upper thread length is uneven: Adjust the sub-tension. * The position of the shuttle race thread guide is incorrect: Adjust the position of the shuttle race thread guide.
D
Danielle RobinsonAug 31, 2025
How to fix the upper thread not being picked up by the fixed knife on a Brother BAS-311F-0?
- H
  Henry HarrisAug 31, 2025
  If the upper thread isn't being picked up, check: * If the fixed knife is blunt: Sharpen or replace the fixed knife. * The shuttle race thread guide position: Adjust the position of the shuttle race thread guide. * The needle bar lift amount: Adjust the needle bar lift amount. * The position of the movable knife: Adjust the position of the movable knife. * If the sub-tension is too weak: Turn the sub-tension nut to adjust the tension.
D
Deanna WilliamsSep 2, 2025
What to do if the thread wiper doesn't operate correctly on my Brother Sewing Machine?
- H
  hernandezmichaelSep 2, 2025
  If the thread wiper isn't working right, try these solutions: * Clearance between thread wiper and needle tip: Adjust the height of the thread wiper. * Adjust the operating distance of the thread wiper.
Y
yvonne45Sep 5, 2025
Why is the work clamp operation sluggish on my Brother BAS-311F-0?
- S
  Savannah BurnettSep 5, 2025
  If the work clamp operation is sluggish, consider these potential causes: * Clamp lubrication: Grease the sliding part of the work clamp. * Presser lifter air tube: Straighten the bend in the tube or replace the tube. * Link return spring: Hook the link return spring properly.
L
Lori Spencer DDSSep 8, 2025
How to fix lower thread winding to one side on a Brother Sewing Machine?
- R
  rwilliamsSep 8, 2025
  To resolve the lower thread winding to one side, try these adjustments: * Adjust the height of the thread tension stud. * Adjust the position of the bobbin presser.
D
Dawn MartinSep 12, 2025
What to do if the solenoid-type work clamp lifts up without clamping the material on my Brother BAS-311F-0 Sewing Machine?
- E
  Emily WolfeSep 12, 2025
  If the solenoid-type work clamp lifts without clamping the material, increase the setting value of the memory switch (memo-35).