To Next PageTo Next Page
Need help?Do you have a question about the Brother CS6000XL and is the answer not in the manual?
General| Type | Computerized Sewing Machine |
|---|---|
| Stitches | 60 |
| Buttonhole Styles | 7 |
| LCD Screen | Yes |
| Sewing Speed | 850 stitches per minute |
| Free Arm | Yes |
| Stitch Width | 7mm |
| Stitch Length | 5mm |
| Voltage | 120V |
| Presser Feet | 10 |
| Warranty | 25-year limited warranty |
| Weight | 13 pounds |
| Needle Threader | Automatic |
| Included Accessories | needle set, bobbins, screwdriver, seam ripper |
| Bobbin Type | Drop-in |
| Speed Control | Variable speed control |
Identifies and illustrates the primary components of the sewing machine.
Details the components related to needle and presser foot placement and function.
Explains the purpose and location of control buttons and the operation panel.
Describes the flat bed attachment and its accessory storage feature.
Lists the accessories that come with the sewing machine.
Lists accessories available for separate purchase.
Instructions for connecting the machine to the power source and turning it on/off.
Overview of the operation panel, LCD display, and control keys for settings.
Guidance on using the foot controller to start, stop, and adjust sewing speed.
Step-by-step instructions for winding thread onto the bobbin and inserting it into the bobbin case.
Detailed guide for threading the upper thread through the machine and needle.
Instructions for operating the automatic needle threader for efficient needle threading.
Explains how to bring the bobbin thread up to the needle level for sewing.
How to inspect the needle for damage or wear before sewing.
Step-by-step guide for safely removing and installing a new needle.
Instructions for using a twin needle for decorative stitches and parallel sewing.
Procedures for attaching and removing different presser feet.
Guidance on initiating sewing, controlling speed, and stopping the machine.
How to sew stitches in reverse or for reinforcement at stitch ends.
Instructions for enabling automatic reinforcement stitches at the beginning and end of seams.
Explains how thread tension affects stitch quality and how to adjust it.
How to use overcasting stitches to prevent fabric fraying.
Technique for creating invisible hems on skirts and pants.
Step-by-step process for sewing buttonholes of various sizes.
Methods for inserting zippers into garments.
How to sew bar tacks for reinforcing stress points like pocket corners.
Guidelines on when and how to oil the machine, and precautions for storing it properly.
Instructions for cleaning the exterior and internal parts like the bobbin race.
An overview of common sewing machine problems and their causes.
Steps to fix problems related to the upper thread being too tight or tangled.
Solutions for issues where fabric is not feeding correctly or gets caught.
Guidance on diagnosing and correcting incorrect upper or bobbin thread tension.
Procedures for safely removing fabric that has become jammed in the machine.
Verifying correct installation and operation after cleaning or maintenance.
Steps to clear thread tangles occurring under the bobbin winder seat.
Explains the meaning of various error codes displayed by the machine.
Describes the different beep sounds and their significance during operation.
