Brother DCP-116C - Changing the Default Black & White File Format; Changing the Default Colour File Format

WALK-UP PHOTOCAPTURE CENTER
™
3 - 15
Changing the default black & white file format
1 Press Menu.
2 Press or to select 2.PhotoCapture.
Press
Set.
3 Press or to select 8.Scan to Card.
Press
Set.
4 Press or to select 2.B/W File Type.
Press
Set.
5 Press or to select TIFF or PDF.
Press
Set.
6 Press Stop/Exit.
Changing the default colour file format
1 Press Menu.
2 Press or to select 2.PhotoCapture.
Press
Set.
3 Press or to select 8.Scan to Card.
Press
Set.
4 Press or to select 3.ColorFile Type.
Press
Set.
5 Press or to select PDF or JPEG.
Press
Set.
6 Press Stop/Exit.