Brother DCP-130C - Color Inkjet - All-in-One - Using the Scan Key; Scan to E-Mail

Network Scanning (For models with built-in network support)
140
11
Using the Scan key 11
Note
If you are connected using USB, see Using the Scan key (For USB cable users) on page 113.
Scan to E-mail 11
When you choose Scan to E-mail (Macintosh
®
), your document will be scanned and sent directly to the
Macintosh
®
you designated on your network. ControlCenter2 will activate the default E-mail application on
the designated Macintosh
®
for addressing to the recipient. You can scan a black and white or color document
and it will be sent with the E-mail from the Macintosh
®
as an attachment.
You can change the (Scan) configuration. (See E-mail on page 128.)
a Load your document.
b Press the (Scan) key.
c Press a or b to choose Scan to E-mail.
Press OK.
d Press a or b to choose the destination Macintosh
®
you want to use for E-mailing your document.
Press OK.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
Macintosh
®
on the control panel.
Press OK.
e Press Black Start or Color Start.
The machine starts the scanning process.