Scanning
30
2
Scanning a document into the PC 2
There are two ways to scan a whole page. You can either use the ADF (automatic document feeder) or the
Flatbed scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you must scan using
the scanner glass (Flatbed). (See Pre-Scanning an image — to crop a portion you want to scan on page 24.)
Scanning a document using the ADF (Available for ADF model) 2
a Load your document.
1 Paper source
2 Picture type
3 Adjust the quality of the scanned picture
4 Page size
b Choose Document Feeder from the Paper source drop-down list (1).
c Choose the picture type (2).
d Choose the Page size from the drop-down list (4).
1
2
3
4
To Next Page
Loading...
