Brother DCP-135C User Manual

Troubleshooting and Routine Maintenance
63
B
f Lift each lock release lever and push it
until it clicks, and then close the ink
cartridge cover.
g The machine will automatically reset the
ink dot counter.
Note
• If you replaced an ink cartridge, for
example Black, before the LCD shows
Near Empty Black or
Ink Empty Black, the LCD will ask you
to verify that it was a brand new one
(Did You Change Blck?). For each
new cartridge you installed, press a (Yes)
to automatically reset the ink dot counter
for that colour. If the ink cartridge you
installed is not a brand new one, be sure
to press b (No).
• If the LCD shows No Cartridge after
you install the ink cartridge, check that the
ink cartridges are installed properly.
WARNING
If ink gets in your eyes, wash them out with
water at once and call a doctor if you are
concerned.
CAUTION
DO NOT take out ink cartridges if you do
not need to replace them. If you do so, it
may reduce the ink quantity and the
machine will not know the quantity of ink left
in the cartridge.
DO NOT touch the cartridge insertion slots.
If you do so, the ink may stain your skin.
If ink stains your skin or clothing, wash with
soap or detergent at once.
If you mix the colours by installing an ink
cartridge in the wrong position, clean the
print head several times after correcting the
cartridge installation.
Once you open an ink cartridge, install it in
the machine and use it up within six months
of installation. Use unopened ink cartridges
by the expiration date written on the
cartridge package.
DO NOT dismantle or tamper with the ink
cartridge, this can cause the ink to leak out
of the cartridge.
Brother multifunction machines are
designed to work with ink of a particular
specification and will work to a level of
optimum performance when used with
genuine Brother Branded ink cartridges.
Brother cannot guarantee this optimum
performance if ink or ink cartridges of other
specifications are used. Brother does not
therefore recommend the use of cartridges
other than genuine Brother Branded
cartridges or the refilling of empty
cartridges with ink from other sources. If
damage is caused to the print head or other
parts of this machine as a result of using
incompatible products with this machine,
any repairs required as a result may not be
covered by the warranty.

Brother DCP-135C Specifications

General

Print technology	Inkjet
Maximum resolution	6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	25 ppm
Print speed (color, normal quality, A4/US Letter)	20 ppm
PictBridge	Yes
Scan speed	4 sec/page
Dimensions (WxDxH)	398 x 360 x 150 mm
All-in-one functions	Copy, Scan
Color all-in-one functions	copy, print, scan
Compatible operating systems	Windows 2000/XP/Vista Mac OS Linux
Scan to	E-mail, OCR, USB
Scanner type	Flatbed scanner
Grayscale levels	256
Maximum scan resolution	19200 x 19200 DPI
Optical scanning resolution	600 x 2400 DPI
Copier resize	25 - 400 %
Maximum copy resolution	1200 x 1200 DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	4
Copy speed (black, normal quality, A4)	5 cpm
Total input capacity	100 sheets
Total output capacity	50 sheets
Internal memory	16 MB
Paper tray media types	Envelopes, Glossy paper, Plain paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), index card, Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
Borderless printing media sizes	A4, A6
Maximum ISO A-series paper size	A4
USB 2.0 ports quantity	1
Bundled software	Brother MFL-Pro Suite Brother ControlCentre3 ScanSoft Paperport 11 SE Brother ControlCentre2 (Mac) NewSoft Presto! (Mac)
Power consumption (PowerSave)	4 W
Power consumption (average operating)	20, 6 W
Package weight	9500 g
Faxing	No
Market positioning	Home & office