Brother DCP-350C User Manual

Troubleshooting and Routine Maintenance
83
B
Machine Information B
Checking the serial number B
You can see the machine’s serial number on
the LCD.
a Press Menu.
b Press a or b to choose
Machine Info..
Press OK.
c Press a or b to choose Serial No..
Press OK.
d Press Stop/Exit.
Packing and shipping
the machine
B
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, you could void your warranty.
CAUTION
It is important to allow the machine to ‘park’
the print head after a print job. Listen
carefully to the machine before unplugging
it to make sure that all mechanical noise
has stopped. Not allowing the machine to
finish this parking process may lead to print
problems and possible damage to the print
head.
a Open the ink cartridge cover.
b Pull the lock release levers down and
take out all the ink cartridges. (See
Replacing the ink
cartridges on page 76.)
c Install the yellow protective part, lift each
lock release lever and push it until it
clicks, and then close the ink cartridge
cover.

Brother DCP-350C Specifications

General

Print Technology	Inkjet
Max Scan Resolution	1200 x 2400 dpi
Interface	USB 2.0
Paper Input Capacity	100 sheets
Functions	Print, Copy, Scan
Scanner Type	Flatbed
Optical Resolution	1200 x 2400 dpi
Max Print Resolution	6000 x 1200 dpi
Max Copy Resolution	1200 x 1200 dpi
Display	LCD
Monthly Duty Cycle	2500 pages
Media Type	Plain paper, photo paper
Printer Type	All-in-One
Copy Resolution	1200 x 1200 dpi
Ink Cartridges	4 (cyan, magenta, yellow, black)