Brother DCP-375CW - Choose Language; Set LCD Contrast

7
6
Choose your language
(if needed)
a Press Menu.
b Press a or b to choose 0.Initial Setup.
Press OK.
c Press a or b to choose 0.Local Language.
Press OK.
d Press a or b to choose your language.
Press OK.
e Press Stop/Exit.
7
Set the LCD contrast
(if needed)
If you are having difficulty reading the LCD from your
position, try changing the contrast setting.
a Press Menu.
b Press a or b to choose 0.Initial Setup.
Press OK.
c Press a or b to choose 2.LCD Contrast.
Press OK.
d Press a or b to choose Dark or Light.
Contrast:Dark
Contrast:Light
e Press OK.
f Press Stop/Exit.