HOW TO SCAN USING WINDOWS
®
9 - 15
Brother Scanner Utility
The Brother Scanner Utility is used for configuring the scanner driver
for resolutions higher than 1200dpi.
To run the utility:
You can run the utility by selecting the Scanner Utility located in the
Start/Programs/Brother/Brother MFL-Pro Suite menu.
If you scan the original at a resolution of greater than 1200dpi, the file
size maybe very large. Please make sure that you have sufficient
memory and hard disk space for the size of the file you are trying to
scan. If the memory & hard disk is not sufficient then your computer
may freeze and you could lose your file.
To Next Page
Loading...
Need help?
General
