Quick Setup Guide
DCP-4020C
Before you can use the DCP, you must set up the hardware and install the driver.
To help you get started in setting up the machine and installing the driver & software,
please read the “Setup Guide” and follow the simple instructions.
For the latest driver and to find the best solution for your problem or question, access the Brother
Solutions Center directly from the driver or go to
http://solutions.brother.com
or
http://www.brother-uk.com
Keep this “Quick Setup Guide”, User’s Guide and supplied CD-ROM in a convenient place for
quick and easy reference at all times.
Step 1
Setting Up the DCP
Step 2
Installing the Driver & Software
Setup is Complete!
Installing the Driver & Software
Setting Up
the DCP
Windows
®
Mac
®
OS
8.6-9.2
Mac
®
OS X
10.1/10.2.1 or greater
To Next Page
Need help?
General
