Brother DCP-4020C - Install Power Cord; Loading Paper

3
Setting Up
the DCP
Windows
®
Mac
®
OS
8.6-9.2
Mac
®
OS X
10.1/10.2.1 or greater
1
Fan the stack of paper well to avoid paper
jams and misfeeds.
2
Unfold the paper support and then press
and slide the paper guide to fit the paper
width.
3
Gently insert the paper.
Make sure the print side is towards you and
the paper is below the maximum paper
mark.
1
Connect the power cord.
Do not connect the USB cable yet.
Warning
■
The DCP must be fitted with an earthed plug.
4
Loading Paper
You can load up to 100 sheets of 80 g/m
2
paper.
For more details, see “Paper capacity of
the Paper Tray” in Chapter 2 of the User’s
Guide.
Paper Support
Paper Width Guide
Paper
Print Side
Maximum
Paper Mark
5
Install Power Cord
Power Cord