Brother DCP-4020C - For Users of Mac os X 10.1; 10.2.1 or Greater

20
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the DCP” on pages 2 to 7.
1
Unplug the DCP from the AC outlet and
disconnect it from your Macintosh
®
if you
already connected an interface cable.
2
Turn on your Macintosh
®
.
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Mac OS X folder to install
the printer and scanner driver.
5
Double-click the MFLPro_Color.pkg icon.
Follow the instructions on the screen.
6
Connect the USB interface cable to your
Macintosh
®
, and then connect it to the DCP.
Do not connect the DCP to a USB
port on a keyboard or a non powered
USB hub.
7
Turn on the DCP by plugging in the power
cord.
8
Open the Macintosh HD icon.
9
Open the Applications folder.
Open the Utilities folder.
For users of Mac
®
OS X 10.1 / 10.2.1 or greater
Step 2