13
Make sure that you followed the instructions in
1
to
F
on pages 10 to 12.
G
When this screen appears, connect the
USB interface to your PC, and then connect
it to the DCP. Turn on the DCP by plugging
in the power code.
.
It will take a few seconds for the installation
screen to appear.
The installation of the Brother driver will
automatically start. Follow the instructions
on the screen.
H
Select BRUSB: USB Printer Port, and then
click Next.
I
Accept the default Printer name by selecting
Yes, and then click Next.
J
Select Yes (recommended), and then click
Finish. A test page will be printed so you
can check the print quality.
K
If the test page is printed correctly, click
Yes. If you click No, follow the prompts on
the screen to correct the problem.
L
The README.WRI file will be displayed.
Please read this file for troubleshooting
information and then close the file to
continue installation.
For Windows
®
98/98SE/Me Users Only
To be continued
Step 2
Installing the Driver & Software
Setting Up
the DCP
Windows
®
To Next Page
Loading...
