Brother DCP-560CN - Sorting Copies Using the ADF (DCP-560 CN Only); Adjusting Brightness, Contrast and Colour

Making copies
31
4
Sorting copies using the ADF
(DCP-560CN only) 4
You can sort multiple copies. Pages will be
sorted in reverse order.
a Load your document.
b Enter the number of copies you want.
c Press a or b to choose Stack/Sort.
Press OK.
d Press a or b to choose Sort.
Press OK.
e If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
Page Layout options are not available
with Sort settings.
Adjusting Brightness,
Contrast and Colour 4
Brightness 4
You can adjust the copy brightness to make
copies darker or lighter.
a Load your document.
b Enter the number of copies you want.
c Press a or b to choose Brightness.
Press OK.
d Press a to or b to make a lighter or
darker copy.
Press OK.
e If you do not want to change additional
settings, press Mono Start or
Colour Start.
Contrast 4
You can adjust the copy contrast to help an
image look sharper and more vivid.
a Load your document.
b Enter the number of copies you want.
c Press a or b to choose Contrast.
Press OK.
d Press a or b to increase or decrease the
contrast.
Press OK.
e If you do not want to change additional
settings, press Mono Start or
Colour Start.
Colour Saturation 4
a Load your document.
b Enter the number of copies you want.
c Press a or b to choose Color Adjust.
Press OK.
d Press a or b to choose Red, Green or
Blue.
Press OK.
e Press a or b to change the colour
saturation.
Press OK.
f Do one of the following:
 If you want to change saturation for
another colour, go to step d.
 If you want to change additional
settings, press a or b to choose
Exit.
Press OK.
 If you do not want to change
additional settings, press
Mono Start or Colour Start.