Brother DCP-560CN - Print Photos

Chapter 5
38
The PhotoCapture Center™ uses these
numbers to identify each picture. You can
print a thumbnail page (Index page with 5
images per line). This will show all the
pictures on the memory card or USB Flash
memory drive.
Note
Only file names that are 8 characters or
less will be printed correctly on the index
sheet.
a Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (PhotoCapture).
b Press a or b to choose Print Index.
Press OK.
c Press a or b to choose the paper
settings, Paper Type or Paper Size.
Do one of the following.
 If you chose Paper Type, press OK
and press a or b to choose the type
of paper you are using,
Plain Paper, Inkjet Paper,
Brother Photo or Other Photo.
Press OK.
 If you chose Paper Size, press OK
and press a or b to choose the paper
size you are using, Letter or A4.
Press OK.
 If you do not want to change the
paper settings, go to d
d Press Colour Start to print.
Print Photos 5
Before you can print an individual image, you
have to know the image number.
a Make sure you have put a memory card or
USB Flash memory drive in the correct slot.
Press (PhotoCapture).
b Print the Index. (See Print Index
(Thumbnails) on page 37.)
c Press a or b to choose Print Photos.
Press OK.
d Press a repeatedly to choose the image
number that you want to print from the
Index page (Thumbnails).
If you want to choose a two digit number,
press
c to move the cursor to the next digit.
(For example, enter 1, c, 6 to print image
No.16.)
Press OK.
Note
Press b to decrease the image number.
e Repeat step d until you have entered all
the image numbers that you want to print.
(For example, enter
1 , OK , 3 , OK , 6 , OK
to print images No.1, No.3 and No.6.)
Note
You can enter up to 12 characters
(including commas) for the image
numbers you want to print.
f After you have chosen all the image
numbers, press OK again.
g Press + or - repeatedly to enter the
number of copies you want.
h Do one of the following:
 Change the print settings.
(See page 44.)
 If you do not want to change any
settings, press Colour Start to print.