Brother DCP-6690CW - Page 116

Control panel setup
106
6
Relay Domain 6
You can register the Domain Names (Max. 5) that are allowed to request a Relay Broadcast.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Relay.
Press OK.
e Press a or b to choose Relay Domain.
Press OK.
f Press a or b to choose Relay(01 - 05).
g Enter the Relay Domain name for the Domain that is being allowed to request a Relay Broadcast.
Press OK.
h Press Stop/Exit.
Relay Report 6
A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay
Broadcasts.
Its primary function is to print reports of any relayed broadcasts that have been sent through the machine.
Please note: In order to use this function, you must assign the relay domain in the “Trusted Domains” section
of the Relay function settings.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Relay.
Press OK.
e Press a or b to choose Relay Report.
f Press d or c to choose On or Off.
Press OK.
g Press Stop/Exit.