Brother DCP-6690CW - Function Table and Default Factory Settings

Appendix B
156
B
Function table and default factory settings B
For MFC-5490CN B
Level1 Level2 Level3 Options
5.Network 1.Setup TCP/
IP
1.BOOT Method Auto/Static/RARP/BOOTP/DHCP
2.IP Address [000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
1
3.Subnet Mask [000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
1
4.Gateway [000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
5.Node Name BRNxxxxxxxxxxxxx= (your machine’s Ethernet address)
(up to 15 characters)
6.WINS Config Auto/Static
7.WINS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
8.DNS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
9.APIPA On/Off
0.IPv6 On/Off
2.Setup Misc. 1.Ethernet Auto/100B-FD/100B-HD/10B-FD/10B-HD
0.Factory Reset