Brother DCP-9270CDN - Adjusting Brightness and Contrast; Sorting Copies Using the ADF

Making copies
15
4
Adjusting Brightness and
Contrast 4
Brightness 4
Adjust the copy brightness to make copies
darker or lighter.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press d or c to display Brightness.
Press Brightness.
e Press d to make a darker copy or
press c to make a lighter copy.
Press OK.
f If you do not want to change additional
settings, press Mono Start or Colour
Start.
Contrast 4
Adjust the contrast to help an image look
sharper and more vivid.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press d or c to display Contrast.
Press Contrast.
e Press d to decrease the contrast or
press c to increase the contrast.
Press OK.
f If you do not want to change additional
settings, press Mono Start or Colour
Start.
Sorting copies using the ADF4
You can sort multiple copies. Pages will be
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so
on.
a Press (COPY).
b Load your document in the ADF.
c Enter the number of copies you want.
d Press d or c to display Stack / Sort.
Press Stack / Sort.
e Press Sort.
f If you do not want to change additional
settings, press Mono Start or Colour
Start.
Note
Sort is available only when the document
is in the ADF.