Brother DCP-J100

12
Macintosh
USB
13
Install MFL-Pro Suite
a Put the CD-ROM into your CD-ROM drive.
b Double-click the Start Here OSX icon to install.
If the model name screen appears, choose
your machine.
c (DCP-J105 only)
Choose Local Connection (USB), and then
click Next. Follow the on-screen instructions.
d After the installation, the Brother software will
search for the Brother device. This will take a
few moments to complete.
e Choose your machine from the list, and then
click Next.
f When the Add Printer screen appears, click
Add Printer.
g Choose your machine from the list. Click Add
and then click Next.
When the support screen appears, click Next.
h When this screen appears, click Close.
Finish
The installation is now
complete.