2
2
Changing the control
panel (if needed)
a Remove the original control panel from the
machine with both hands. Then attach the
control panel of your chosen language.
3
Connect the power cord
The machine must be fitted with an earthed
plug.
a Connect the power cord.
4
Choose your language
a When the LCD shows this message, press OK.
Select Language
q
Press OK Key
b Press a or b to choose your language and
press OK.
c Press a (Yes) to confirm the language setting.
DO NOT connect the USB cable yet (if you are
using a USB cable).
• The Warning LED on the control panel will stay
on until you have installed the ink cartridges.
• To prolong the life of the print head, provide the
best ink cartridge economy and maintain print
quality, we do not recommend unplugging the
machine frequently and/or leaving the machine
unplugged for extended periods of time. Each
time you plug the machine in, it automatically
cleans the print head, which uses some of your
ink.
We recommend using to power down the
machine. Using allows minimal power to
the machine, resulting in periodic, but less
frequent, cleaning of the print head.
To Next Page
Loading...
