Brother DCP-J125 - Page 120

Menu and features
91
C
Menu ( ) (continued)
Level1 Level2 Level3 Options Descriptions Page
Print Reports XMIT Verify — — Prints these lists and
reports.
26
Help List ——
See
1
.
Quick Dial —
Alphabetic Order
Numeric Order
Fax Journal ——
User Settings ——
Network Config ——
WLAN Report ——
Caller ID hist. ——
Machine Info. Serial No. — — Lets you check the serial
number of your machine.
82
Initial Setup Receive Mode — Fax Only*
Fax/Tel
External TAD
Manual
Choose the receive mode
that best suits your needs.
27
Date&Time — — Puts the date and time on
the LCD and in headings
of faxes you send.
See
2
.
Station ID — Fax:
Name:
Set your name and fax
number to appear on each
page you fax.
Tone/Pulse
(Not available in
New Zealand)
— Tone*
Pulse
Choose the dialling mode. 31
Dial Tone — Detection
No Detection*
Turns Dial Tone Detection
on or off.
81
Compatibility — High*
Normal
Basic(for VoIP)
Adjusts the modem speed
to help resolve
transmission problems.
81
1
See Advanced User’s Guide.
2
See Quick Setup Guide.
The factory settings are shown in Bold with an asterisk.