Chapter 9
54
i Do one of the following:
To change the file name, go to
step j.
Press Mono Start or Colour Start to
start scanning without changing
additional settings.
j The file name is set automatically;
however, you can set a name of your
choice using the dial pad.
Press a or b to choose File Name.
Enter the new name. (See Entering Text
on page 104.)
You can only change the first
6 characters.
Press OK.
Press Clear to delete the current name.
k Press Mono Start or Colour Start.
You can place multiple documents on the
scanner glass and scan them as separate
files. (See Auto Crop in chapter 8 in the
Advanced User’s Guide.)
To Next Page
Loading...
