Brother DCP-J132W

5-58
Confidential
1.4.30 Equipment Error Code Indication (Maintenance mode 82)
<Function>
This function displays an error code of the last error on the LCD.
<Operating Procedure>
(1) Enter [8] and [2] in the initial stage of the maintenance mode.
The machine displays "MACHINE ERR XX" on the LCD.
Tip If two or more errors have occurred, press [Mono Start] to cycle through the error
codes.
(2) Press [Stop] or [X] to return the machine to the initial stage of the maintenance mode.
1.4.31 Output of Transmission Log to the Telephone Line (Maintenance mode 87) (For fax
models only)
<Function>
This function outputs the transmission log to the telephone line. It allows the service
personnel to receive the transmission log of the user’s machine at a remote location and
use it for analyzing FAX transmission problems arising in the user’s machine.
<Operating Procedure>
- At the service site
(1) Call the user’s machine at a remote location from your machine.
- At the user site, have the user perform the following.
(2) When the machine is on standby, press [Menu], [Mono Start], and [Menu] in order.
(3) Press [8] and [7] in this order.
The machine displays "SENDING P.01" on the LCD and transmits the error list.
Upon completion of error list transmission, the machine returns to the standby state.