Brother DCP-J1700DW - Page 339

Level 3 Level 4 Level 5 Level 6 Descriptions
Wi-Fi Direct Manual
- - Configure your Wi-Fi Direct network
settings manually.
Group Owner
- - Set your machine as the Group
Owner.
Push Button
- - Configure your Wi-Fi Direct network
settings using the one-button push
method.
PIN Code
- - Configure your Wi-Fi Direct network
settings using WPS with a PIN
code.
Device
Information
Device Name
- View your machine's device name.
SSID
- View the Group Owner's SSID.
When the machine is not
connected, the LCD displays Not
Connected.
IP Address
- View your machine's current IP
Address.
Status
Information
Status
- View the current Wi-Fi Direct
network status.
Signal
- View the current Wi-Fi Direct
network signal strength.
When your machine acts as Group
Owner, the LCD always indicates a
strong signal.
I/F Enable
- - Turn the Wi-Fi Direct connection on
or off.
Message from
Brother
Message from
Brother
- - Display messages and notifications
from Brother.
Status
- -
Web Connect
Settings
Proxy Settings Proxy
Connection
- Change the Web connection
settings.
Address
-
Port
-
User Name
-
Password
-
Network I/F
(DCP-J1800DW)
- - - Select the network connection type.
Network Reset
- - - Restore all network settings back to
the factory settings.
[Print Reports]
[All Settings] > [Print Reports]
Level 3
Descriptions
User Settings
Print a list of your settings.
Network Configuration
Print a list of your Network settings.
WLAN Report
Print the wireless LAN connection results.
334